Lightweight Aluminum Loading Ramps for Tesla Cybertruck
Lightweight Aluminum Loading Ramps for Tesla Cybertruck
Aluminum Portable Loading Ramps for Tesla Cybertruck
Make the Cybertruck bed easier to access with lightweight, foldable aluminum loading ramps designed for motorcycles, ATVs, lawn equipment, utility gear and other compatible wheeled loads within the published ramp capacity.
750 lb Capacity per Ramp
Each ramp carries a manufacturer-rated load of up to 750 lb, while a properly positioned pair is rated up to 1,500 lb combined with the load appropriately distributed.
Foldable & Portable
A center folding hinge reduces the storage footprint, making the ramp easier to carry and store in the Cybertruck bed when it is not being used.
High-Traction Ramp Surface
Raised perforated aluminum cross-plates create additional contact points for tires while helping provide better grip during loading and unloading.
Turn the Cybertruck Bed Into a More Practical Loading Platform
Creates a gradual transition from ground level to the lowered tailgate for motorcycles, small recreational equipment, carts and other suitable wheeled loads.
Suitable for loading compatible lawn equipment, utility carts, jobsite equipment and recreational vehicles when their weight and wheel layout remain within the ramp limits.
Aluminum construction provides a practical balance between load-bearing strength and portability compared with a similarly sized solid-steel ramp.
The upper ramp end is shaped to overlap the loading edge, while current product imagery shows securing straps / hardware for stabilizing the ramp during use.
Choose one ramp for suitable single-track applications or a matched pair when the load requires two parallel wheel paths.
1 PC or 2 PCS?
1 PC:
Best for compatible narrow or single-track loads where
one continuous wheel path is appropriate.
2 PCS:
Creates two parallel loading tracks for compatible ATVs,
carts and other equipment with left/right wheels.
Built for Loading, Folding & Repeated Transport
Set Up the Ramp Correctly Before Loading
Position the Cybertruck on firm, level ground, engage Park and ensure the truck cannot move while loading.
Fully open the tailgate and make sure the loading edge is clean and unobstructed before placing the ramp.
Open the folding sections completely and inspect the hinge, cross plates and side rails for damage before placing weight on the ramp.
Position the upper contact lip squarely on the loading edge without leaving only a small portion of the ramp supported.
Use the supplied securing hardware / straps as directed so the ramp cannot slide backward or separate from the loading edge while the load is moving.
For a two-ramp setup, match the spacing to the equipment's wheel track and verify every tire stays centered on its ramp during the entire loading path.
A pair being rated at 1,500 lb does not mean one ramp may carry more than 750 lb. Check the actual wheel-by-wheel load distribution, not only the equipment's total weight.
Do not use a ramp with a bent rail, damaged hinge, loose hardware, cracked weld, damaged securing strap or visibly deformed traction plate.
Specifications
| Attribute | Details |
|---|---|
| Product | Aluminum Portable Loading Ramp |
| Vehicle Compatibility | Tesla Cybertruck 2024+ |
| Quantity Options | 1 PC / 2 PCS |
| Manufacturer Load Rating — 1 Ramp | Up to 750 lb / Approx. 340 kg |
| Manufacturer Combined Rating — Pair | Up to 1,500 lb / Approx. 680 kg with Load Appropriately Distributed |
| Main Material | Aluminum / Aluminum Alloy Construction |
| Ramp Construction | Open-Frame Side Rails with Perforated Traction Cross-Plates |
| Folding Design | Yes — Center Folding Hinge |
| Anti-Slip Surface | Perforated / Textured Aluminum Traction Plates |
| Tailgate Contact | Widened Upper Support / Loading Lip |
| Securing Hardware | Securing / Locking Hardware Shown in Current Product Images |
| Tool Requirement for Normal Setup | Manufacturer Describes Tool-Free Setup |
| Permanent Vehicle Modification | Not Required for Normal Ramp Use |
| Published Expanded Dimensions | Not Published |
| Published Folded Dimensions | Not Published |
| Published Ramp Weight | Not Published |
| Published Maximum Ramp Angle | Not Published |
| Published Strap / Lock Rating | Not Published |
| Published Safety Certification | Not Published |
| Package | 1 or 2 Aluminum Loading Ramp(s), Depending on Selected Quantity, with Matching Securing Hardware as Supplied |
Quick Answers
Which Cybertruck years does this ramp fit? +
The current manufacturer lists the ramp for Tesla Cybertruck 2024 and later.
How much weight can one ramp support? +
The manufacturer rates each ramp for up to 750 lb (approximately 340 kg).
How much can two ramps support together? +
The manufacturer rates a pair for up to 1,500 lb combined when the load is appropriately distributed between the two ramps. Neither individual ramp should exceed 750 lb.
Should I choose 1 PC or 2 PCS? +
One ramp may suit compatible single-track equipment. Two ramps are generally appropriate for loads requiring two parallel wheel paths, such as compatible ATVs or carts.
Can I use the ramps for an ATV? +
The manufacturer lists ATVs among the intended applications. Confirm the ATV's total weight, wheel-by-wheel load, tire width and wheel spacing remain compatible with the ramp pair before use.
Can I use one ramp for a motorcycle? +
Motorcycles are listed by the manufacturer as a possible application, provided the tire fits the ramp path and the full loading method is safe for the motorcycle's weight, balance and ramp width.
Do the ramps fold? +
Yes. Current manufacturer documentation and product images show a folding center hinge for more compact transport and storage.
Are the ramps aluminum? +
Yes. Both current Tesery and TESKAY descriptions identify aluminum / aluminum-alloy construction.
Is the surface anti-slip? +
The manufacturer specifically lists an anti-slip textured surface, and current product imagery shows perforated traction plates along the loading path.
Do I need to drill into the Cybertruck? +
No permanent vehicle drilling is described for normal ramp setup. The ramp is placed at the lowered tailgate and secured for loading, then removed after use.
Do I need tools to set the ramps up? +
The manufacturer describes normal deployment and securing as a quick, tool-free setup.
Are securing straps included? +
Current product images show securing strap / locking hardware attached to the ramp. Exact strap specifications and rated breaking strength are not published.
Can I use the pair if my equipment weighs exactly 1,500 lb? +
The manufacturer publishes 1,500 lb as the combined pair rating, but actual suitability also depends on how weight is distributed between the wheels. No individual ramp may exceed its 750 lb rating.
What are the ramp dimensions? +
No verified expanded length, width or folded dimensions are currently published on the source pages, so this description does not invent those measurements.
How much does each ramp weigh? +
The current manufacturer describes the ramp as lightweight and portable but does not publish a verified unit weight.